It’s taken us a while to install these! They were made by a very talented boat builder for us 3 years ago and we’ve sailed with them all the way from Europe to the Caribbean and back again without actually installing them where they should be. They have been living under Ayden’s mattress if we’re […]
Composite engine room doors Read More »
So you’ve spent the money and replaced all the standing rigging. You’ve done a bit of sailing and the wires have settled a bit. Now it’s time for a tune. How do you do that? What are you looking for? Did you know that you should be tuning your front beam as well? Prepare to
Tuning the Mast and Front Beam on a multihull Read More »
We have a large crack in the bottom of the starboard hull. It runs longitudinally from the engine room door to the entrance of the aft cabin. Honestly, it looks worse than it actually is, as Shayne had already repaired the hull from the outside when we did our first major upgrades in Valencia so
Repairing the starboard Hull Read More »
We have bought a Bambu Lab X1 carbon series 3d printer. It is large, it is heavy (it weighs almost 23kg) and it does not like a humid environment. So, you may ask, what’s the story? Aren’t we trying to lighten this boat? Picture of our 3d printed winglets that will attach to our rudders
3D Printed Rudder Winglets Read More »
We have started our refit! Paikea is out of the water in Barcelona and Shayne is spending whatever spare minutes he has from America’s Cup work to help the boys and me with work on our own boat. Harry takes us through what our plans are for the interior refit of Paikea. It is ambitious
Crack in the hull and asymmetric rudders – Barcelona refit Begins Read More »
Hola Barcelona! Yep, after an adventurous few years, we are back where we started in the Mediterranean. Spain is where we decided to start modifying our Catana42 over 4 years ago. We got our hands on an ex-America’s Cup rig that was destined for the rubbish. It was made from high-modulus carbon and was stiff
Completion of our second transatlantic crossing on Paikea Read More »
Azores to the Portuguese Coast requires a fair bit of upwind sailing in this episode. It’s wet and bumpy and not particularly comfortable.
Halfway to the Azores and it’s windy! Olly (13) runs through how we sail offshore on Paikea. We loved his commentary so much that we just had to share it with you. The best thing you can do for your kids is to involve them in sailing. It gives them confidence and purpose. Plus they
Half way to the Azores Read More »
In this installment we show you how we go about reefing downwind. We can reef at any point of sail and in any conditions. If you are interested in how we have set up the reefing system on Paikea check out our blog link here , The key to any a successful reefing manoeuver is
How to Reef Downwind Read More »
After the mad rush of building a new composite rudder, carbon fibre chainplate, and replacement bulkhead, along with repairing our fractional asymmetrical spinnaker and numerous other boat tasks we were ready to leave the Caribbean and head for the Azores. The Azores Archipelago are a group of islands off the Portuguese coastline and a popular
Caribbean to the Azores – downwind in light airs Read More »