Sailing and upgrading our performance catamaran, a Catana42s named Paikea
This video is all about understanding the basics of jib trim on a catamaran. In order to get the best out of your vessel you need to understand your headsail. You need to know what sail shape you are aiming for, what leech profile you should have, and what your telltales should be doing. In […]
Jib Trim Basics for your Catamaran Read More »
Correcting the mast rake on Paikea You may be asking what exactly is Mast Rake and why is it important. Mast rake is the angle at which the mast leans aft from the vertical position. The picture below shows the rake in a Gunboat 68. The angle of the Gunboat mast from the red vertical
Understanding Mast Rake Read More »
Of course, if one chainplate is pulling out of the boat, the other one is not far behind. This week we are fixing chainplates, shortening forestays, digging rot out of the windows, and everything in between as we desperately try and get Paikea ready for another Atlantic Crossing. We showed our rudder-making process as a
A Chainplate for the Starboard Side Read More »
You may be surprised to hear that we think not everything needs to be made from carbon fibre. Oh yeah, it looks cool and it’s super strong but do we really need to throw all those extra bucks at it so that we can say it’s made from carbon? Not really. In this episode, we
Torque Tabs and Tiller Arm Read More »
Join us for the second half of our composite rudder project. As most of you already know, we built two new rudder blades for Paikea when we did our refit in Valencia, Spain in 2020. As the boat was on a cradle that was quite low to the ground, we were unable to remove the
Making our rudder – PART 2 Read More »
We lost our rudder over a year ago during our Atlantic Crossing from The Canary Islands to St Lucia in the Caribbean. The rudder made a rather sneaky exit and at the time there was no catastrophic event to alert us to the problem. We just began to have trouble steering a straight course. In
Rudder Build – Part One Read More »
We can reef at any time, in any conditions at any point of sail Every boat owner should be confident that they can reef their mainsail in any conditions. We can reef our mainsail at any time – this means that even if it is blowing dogs off chains and we are heading downwind we
Reefing Setup on our Catamaran Read More »
A tour of Paikea, our Catana42s, would not be complete without discussing the carbon fibre rotating mast. We have mentioned the rig before in a previous post Recycling a TNZ America’s Cup mast into a rotating rig. Rescued from the rubbish, this is a mast with history. It is the old America’s Cup Team New
Paikea’s Carbon Rotating Mast Read More »
You’ve seen the videos on why we chose a boat from the 1990s to live on, and you’ve had a look at the transom and aft cockpit upgrades and future plans, and now it’s time to share our ideas for the deck of Paikea. If you are familiar with our channel you would already know
Catana42s Boat Tour – The Deck Read More »
In our previous video we told you why we bought a 33 year old catamaran instead of nice new shiny one. Now it’s time to take you on a tour of the old girl. This week is all about the aft end of the bus. The transom and cockpit in particular. Join us as Shayne
Catana 42s Boat Tour – Aft Section Read More »