From America’s Cup Trash to Boat-Building Treasure: Our Paikea Refit Update It’s been a long haul of late nights and tired eyes, but we’re finally at a stage where we can step back and say, “Okay, we’re getting there,” rather than, “Oh, s#%t, what have we done?” Welcome back to the mess that is Paikea. […]
From America’s Cup Trash to Boat-Building Treasure: Our Paikea Refit Update Read More »
From Cardboard to CAD: Designing Paikea’s Shower Sump and Drain Every finished part on this boat starts somewhere unglamorous. This one started as cardboard. Before any of the actual bathroom floor took real shape, the design existed as a rough cardboard mock-up — cheap, fast, and disposable enough to get wrong a few times before
Solving Boat Shower Drainage with Cardboard, CAD, 3D Scanning & 3D Printing Read More »
Why a Shower Floor Isn’t as Simple as It Looks A shower floor sounds like the simplest thing on a boat to build. It isn’t — not once you account for a boat that never sits quite level. The trim problem nobody warns you about A cruising catamaran doesn’t stay put transversely — she’s stable
Why a Shower Floor Isn’t as Simple as It Looks Read More »
Acrylic Hatch Lenses: Finally, Hatches You Can See Through After months of solid, opaque hatch covers — and a long, frustrating search for a European acrylic supplier who’d actually reply to messages — the lenses finally arrived. Fitting the lens: why MS sealant, not urethane Bonding an 8mm acrylic lens into a 15mm-deep hatch trough
Acrylic Hatch Lenses: Finally, Hatches You Can See Through Read More »
Diagnosing and Repairing Hull Delamination: A Real Structural Repair, Not a Cosmetic One Pulling up an old floor panel to find “a little bit of delamination” turned into a full structural repair once the actual extent of the damage became visible. Finding the crack, and following it further than expected A suspected crack in the
Diagnosing and Repairing Hull Delamination: A Real Structural Repair, Not a Cosmetic One Read More »
Removing Harry’s Overhead Hatch: Filling In the Forward Deck Opening Cutting a big hole in the boat isn’t unusual on this refit. This particular hole is the reason the whole flush hatch programme started in the first place. The hatch that started it all The forward hatch over Harry’s bunk was the single worst offender
Removing Harry’s Overhead Hatch: Filling In the Forward Deck Opening Read More »
