Learn a few tips and tricks on how we tackle composite projects on Paikea. You may already be familiar with composites work or you may be a complete novice. Either way, there is something for everyone in this collection. This playlist contains both shorts and some of our full-length videos featured on Youtube for you to browse through.
«
Prev
1
/
3
Next
»
Installing Harry's Floor and Bunk
ADVANCED INFUSION setup and our kids are BUILDING the floor
The issues when infusing in COLD, RAINY weather
Preparing for a new floor and tearing out furniture in forward cabin
Functionality and Servicibilty – making our Bunk Gussets awesome
Laminating penetrations using a 3D printed PLUG
The correct way to put a HOLE through a bulkhead
Vacuum Bagging Components with Polyester Resin
Carbon fibre door frame for our old Catana42
Repairing the crack in our starboard hull
We have a LARGE CRACK in the hull!
Building a Composite Chainplate
Making a composite Rudder – PART TWO
Replacing our ROTTEN Bulkhead
Making Carbon Fibre Chainplates
«
Prev
1
/
3
Next
»
Rudder Build
We also have a short series on our current rudder build project which we have in the playlist below. You can watch the full build series Part One – making the rudder blank and Part Two lamination and fitting on our Youtube Channel.
«
Prev
1
/
1
Next
»
Foam rudder blanks for our new rudders
Hand shaping catamaran rudders
Carbon fibre rudder stock for new rudders
Rudder stock being glued in
Lamination of torque tabs to rudder
Composite Rudders Part One
Composite Rudders
Carbon fibre tiller arm
A light weight sanding board
Rudder with solid SS stock versus carbon fibre stock
Removing our mismatched rudders
«
Prev
1
/
1
Next
»
Learning the Basics of Composites
If you are interested in learning more about composites, these guys are worthwhile checking out. The company is called Easycomposites and are suppliers based in the UK. They run their own instructional YouTube channel which has some good information for those wanting to learn more.
«
Prev
1
/
3
Next
»
Making A Complex Hollow Carbon Fibre Drone Fuselage
An Easy Way to Stop Carbon Fabric Fraying and Distorting
Making Precision Split-Moulds for Complex Carbon Fibre Parts
Making Professional Carbon Fibre Parts Using Resin Infusion
